> For AI agents: the complete documentation index is available at /llms.txt, the full documentation bundle is available at /llms-full.txt.

# How to Expand Disk via Growpart and Resize2fs

This guide shows how to expand a disk from the command line using `growpart` and `resize2fs`.

:::warning

Before proceeding, make sure you have a backup of your important data. Resizing disks can be risky if not done correctly. Also make sure you have identified the correct disk and partition, because expanding the wrong partition can result in data loss.

:::

## Expand the Disk


### Check the current disk usage
Check the current disk usage and available space with the `fdisk -l` command:
```bash
fdisk -l
```
Output:
```
root@vps:~# fdisk -l
...
Disk /dev/vda: 100 GiB, 107374182400 bytes, 209715200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: CA147C86-F18D-46FC-A68E-BC0F0EFB040E

Device       Start      End  Sectors  Size Type
/dev/vda1     2048     4095     2048    1M BIOS boot
/dev/vda2     4096  1052671  1048576  512M Linux swap
/dev/vda3  1052672 52428766 51376095 24.5G Linux filesystem
```
In this output, `/dev/vda3` is the root partition and the one we want to resize. The `/dev/vda` disk shows **100 GB**, while the root partition `/dev/vda3` is still only about **25 GB**.
### Expand the partition with growpart
Use `growpart` to expand the partition so it uses the remaining space on the disk:
```bash
growpart /dev/vda X
```
Replace `X` with the actual partition number. Here the partition is `/dev/vda3`, so `X` is `3`:
```bash
growpart /dev/vda 3
```
Output:
```
root@vps:~# growpart /dev/vda 3
CHANGED: partition=3 start=1052672 old: size=51376095 end=52428767 new: size=208662495 end=209715167
```
### Resize the filesystem
Now resize the filesystem so it uses the newly allocated space. `resize2fs` works with ext2, ext3 and ext4 filesystems, so make sure your filesystem is supported before running it.
```bash
resize2fs /dev/vdaX
```
Since the root partition is `/dev/vda3`, replace `X` with `3`:
```bash
resize2fs /dev/vda3
```
Output:
```
root@vps:~# resize2fs /dev/vda3
resize2fs 1.46.5 (30-Dec-2021)
Filesystem at /dev/vda3 is mounted on /; on-line resizing required
old_desc_blocks = 4, new_desc_blocks = 13
The filesystem on /dev/vda3 is now 26082811 (4k) blocks long.
```
The partition and the ext4 filesystem now use the available disk space.
### Verify the expansion
Run `fdisk -l` again to confirm the partition is now using the additional space:
```bash
fdisk -l
```
Output:
```
root@vps:~# fdisk -l
...
Disk /dev/vda: 100 GiB, 107374182400 bytes, 209715200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: CA147C86-F18D-46FC-A68E-BC0F0EFB040E

Device       Start       End   Sectors  Size Type
/dev/vda1     2048      4095      2048    1M BIOS boot
/dev/vda2     4096   1052671   1048576  512M Linux swap
/dev/vda3  1052672 209715166 208662495 99.5G Linux filesystem
```

You have now expanded the disk using `growpart` and `resize2fs`.
